Phencyclidine, also known as PCP or Angel Dust, is a hallucinogen that was first marketed as a surgical anesthetic in the 1950’s. It was removed from the market because patients receiving it became delirious and experienced hallucinations.

PCP is used in powder, capsule, and tablet form. The powder is either snorted or smoked after mixing it with marijuana or vegetable matter. PCP is most commonly administered by inhalation but can be used intravenously, intra-nasally, and orally. After low doses, the user thinks and acts swiftly and experiences mood swings from euphoria to depression. Self-injurious behavior is one of the devastating effects of PCP.

The Phencyclidine contained within the PCP Rapid Test Panel yields a positive result when the PCP concentration exceeds 25ng/ml.

 

【DIRECTIONS FOR USE】

Test device (in closed pouches), samples, and controls should be brought to room temperature (15-30°C) prior to testing. Do not open pouches until ready to perform the assay.

Remove the test device from its protective pouch and label the device with patient’s identification or control label.

FOR SURFACES

1. Wipe with the panel over the surface in which the drugs are expected.

2. Take off the cap of supplied tube;

3. Fill all buffers from the supplied tube of buffer into the protection cover.

4. Insert the Multi Test slowly and carefully into the protection cover with buffer.

5. Wait for lines to appear on the membrane and read the results after 5 minutes and do not interpret the result after 10 minutes.

 

FOR SOLIDS

1. Open the tube and put the solid in to the buffer.

2. Close the tube with dropper and cap. Shake it a short time. Wait for 30 sec.

3. Take off the cap of supplied tube;

4. Fill all buffers with dissolved substances into the protection cover.

5. Insert the Multi Test slowly and carefully into the protection cover with buffer.

6. Wait for lines to appear on the membrane and read the results after 5 minutes and do not interpret the result after 10 minutes.